D-Tek Vehicle Loop Detector

The D-TEK vehicle loop detector was designed for easy installation and operation. It provides maximum surge protection on all inputs and outputs of the detector.

Features:

 Loop Diagnostics
 Loop Isolation Transformer
 Aluminum RF Shield Housing
 Surge Protection
 Loop Frequency Counter
 Two High Intensity LED Indicators

Loop Detector Accessories

 11 pin detector harness for use with D-Tek loop detectors.

 DIN Rail mountable 11 pin socket base for use with D-Tek loop detectors.

NIRPlus™ Retro-Reflective Photoeye

The NIRPlus™ retro-reflective photoeye can be used as a reversing sensor for commercial overhead doors, gates and parking barriers.

Features:

 Flexible voltage 12V AC/DC to 230V AC
 Watertight package for reliable outdoor installation
 45 ft. range
 6 ft. cable
 Bracket and mounting hardware included
 Two LED indicators
 Sensitivity adjustment
 Size: 2" high, 2" deep, 0.70" wide
 Lower current draw of only 25mA
 Reflector included

Optional Reflector Hood for NIRPlus™

Optional Photobeam Hood for NIRPlus™

IRB-4X Throughbeam Type Infrared Photocell

Works without lenses so it is easy to align, making it less sensitive to fog, dust, snow, and sunlight. Used as a safety, reversing, or opening device in conjunction with automatic operators.

Features:

 Infrared transmitter and receiver in a weather-proof NEMA 4X enclosure.
 Has 24 degrees of alignment freedom.
 Is capable of penetrating 70% obstruction due to fog, steam and even spray.
 Is immune to vibration.
 75 ft. range