DTK-120HW

AC Hardwired Transient Voltage Surge Suppressor.

Features:

 Installation Point: Single Circuit
 Connection Method: Hardwire parallel connection
 Continuous Current: Unlimited (Parallel Installation)
 Service Voltage: 110 / 125 VAC
 Max Surge Current: 22,500 Amps
 Max Energy Dissipation: 190 Joules
 Suppressed Voltage Rating: 600V
 Operating Temperature Range: -40 degrees C. to +85 degrees C.
 Operating Environment: Outdoor use, out of direct weather (5% to 100% non-condensing)

DTK-240HW

120/240V Hardwire 2 W+G.

Features:

 Installation Point: Single Circuit
 Connection Method: Hardwire parallel connection
 Continuous Current: Unlimited (Parallel Installation)
 Service Voltage: 120 / 240 Split Phase
 Max Surge Current: 27,000 Amps
 Max Energy Dissipation: 228 Joules

DTK-2LVLP-LV

2 Pair Terminal Strip for low voltage line protection.

Features:

 Installation Point: Wire entry to building
 Connection Method: Screw terminals, #22-#14 awg wire
 Continuous Current: Unlimited
 Service Voltage: 30V
 Max Surge Current: 2000A (per pair)
 Max Energy Dissipation: 17 Joules (per pair)
 Wiring Configuration: 2,4,6 and 8 wire Models Available
 Typical Let Through Voltage: 42.0 - 52.0 (per pair)

DTK-4LVLP-LV

4 Pair Terminal Strip for low voltage line protection.

Features:

 Installation Point: Wire entry to building
 Connection Method: Screw terminals, 22-14 awg wire
 Service Voltage: 30V
 Max Energy Dissipation: 17 Joules
 Typical Let Through Voltage: 42 - 52

DTK-4LVLP-CR

Surge protection for card readers and Keypads.

Features:

 Installation Point: Grounding point for card readers, keypads, gate c
 Connection Method: Screw terminals, 14-22 awg wire
 Continuous Current: 3 Amps (power) 150 mAmps (L.E.D. & Data)
 AC Protection Modes: All wires protected
 Service Voltage: 12VDC or 24 VDC (power) <5VDC (LED & Data)
 Max Surge Current: 3,000 Amps
 Max Energy Dissipation: 37 Joules
 Operating Temperature Range: -40C - +85C
 Operating Environment: Outdoor use, out of direct weather

DTK-2LVLP-SCP-RUV

2 Pair Terminal Strip w/Sneak Current Protection for low voltage line protection.

Features:

 Installation Point: Wire entry to building
 Connection Method: Screw terminals, 22 - 14 awg wire
 Continuous Current: <150 mAmps
 Max Surge Current: 9000A per pair
 Max Energy Dissipation: 76 Joules per pair
 Typical Let Through Voltage: 130VRMS

DTK-4LVTEP

Low voltage telephone entry system protector.

Features:

 Installation Point: Grounding point for telephone entry system
 Connection Method: Screw terminals, 14-22 awg wire
 Continuous Current: 12V/24V Power - 16 Amps, Data/Telco Tip and Ring - 150 mAmps
 Service Voltage: 12 VDC/24 VDC (Power), <5VDC (Data), 120V (Telco)
 Max Surge Current: 2,000 Amps (12V/24V Power, 9,000 Amps (Telco), 1200 Watts (Data) (per pair)
 Max Energy Dissipation: 8 Joules (12V Power), 16 Joules (24V Power), 76 Joules (Telco) (per pair)