CT-6 Sensor Probe

Available in 50 ft. increments up to 500 ft; 100 ft. increments from 500 ft. up to 3000 ft.

Features:

 Maintenance free
 Bury beside driveway-no excavation
 Covers 12 ft. wide driveway
 Probe and wire do not require conduit
 Sealed weatherproof construction

CP-3 System

The CP-3 is a fully self-contained vehicle detector trigger system with custom length of direct burial cable attached. Simply attach wires directly from the sensor probe to the gate operator, etc.

Features:

 Includes built-in circuit board in weatherproof probe housing
 Bury beside driveway-no excavation
 Covers 12 ft. wide driveway
 Bi-directional when using two CP-2's together
 Low power operation
 Universal voltage
 No earth grounding required
 Direct burial cable. No need for conduit
 Cable available in 100, 200, 300, and 500 ft.

CT-8 Annunciator

This is an annunciator plate with a piezo-type Mallory Sonalert® audible signal device and volume control. The volume control can also be used to turn the Sonalert off. Can adjust length of tone from 1/2 to 15 seconds (CT-2B/G) or 1/2 to 30 seconds (CF-2C).

Features:

 Sounds when a vehicle passes probe.
 No vehicle enters undetected.
 Circuit board w/ screw terminal hook up.

CT-2B Control Unit

This control unit has a single timed output and simplified features. Field adjustments include relay time and probe sensitivity.

Features:

 Detects four locations
 Annunciates twelve locations
 Used with CT-6 probe, detects moving vehicles
 Adjustable probe sensitivity
 Adjustable relay time
 Manual trip test
 Re-trigger hold off
 Transient suppressor
 Annunciation capability